Stairville Tri Flat PAR Profile, User Manual

Page: 37 / 56

A constant colour can only be activated when the unit is working alone or as Master in a
Master / Slave combination. This setting is only relevant when the unit is not DMX-controlled.
Press
[Mode] repeatedly until the display shows ‘Colr’ . Press [Setup] . The display shows the set‐
ting for one of the basic colours (display shows ‘r.xxx’ , ‘G.xxx’ or ‘b.xxx’ ). Press [Setup] to toggle
between colours.
Use
[Up] and [Down] to adjust the colour intensity:
Display Description
‘r.000’ … ‘r.255’ Red
‘G.000’ … ‘G.255’ Green
‘b.000’ … ‘b.255’ Blue
To reset all settings you have made to factory defaults, press [Mode] and [Setup] simultane‐
ously for five seconds. After the reset, the unit operates in automatic mode. The display shows
‘AUTO’ .
Constant colour
Reset to factory defaults
Operating
Tri Flat PAR Profile 18x3W RGB
37