![background image](http://html1.mh-extra.com/html/stageline/sp218uxl/sp218uxl_description_1357337036.webp)
SP218UXL-19“
36
or the “Idle-mode” without a DMX512 input signal. If “cue on error“
is „on“, a stored DMX512 frame is send instead the idle-mode. The
basic status is "oFF" and is changeable with button [b] and [a].
For the following modes only:
3
,
4
,
H
,
L
,
d
,
n
,
u
.
6. Special functions -
Test, record, play
(in preparation)
A special function can be called from any mode. After completion of
an activated special function the previous mode becomes active
again.
Call function: M c b a
Push the mode-button and keep it down, then give the button [b] a
short push. Now letting off mode-button again. The display changes
to the last activated function. Pressing mode-button again shows
the next function.
!
Without a further keystroke, within 5 seconds, the set-up is left to
the active mode.
A special function is activated by pressing the mode-button for one
second. The previous mode is ended and the selected function
takes control to the DMX512 output.
6.1 Test 1
= adjust one channel, rest is zero
All 512 channels are put on zero on function start. Any channel is
selectable and its value changeable. Edited channels hold its
values when changing the channel.
Adjust channel from 001 up to 512
M c b a
Summary of Contents for SP218UXL
Page 44: ...SP218UXL 19 44...