![background image](http://html1.mh-extra.com/html/stageline/sp218uxl/sp218uxl_description_1357337033.webp)
SP218UXL-19“
33
5.3.1 Output 1 and 5, THRU or Booster
Output 1 and 5 take a special position at the SP218UXL. At the
predecessor model these outputs were connected through to IN A
an IN B only in the off condition of the device. Otherwise they
behaved like the other exits.
It is now possible to set the following attitudes for both outputs
separately.
(n
=
normal) the output signal corresponds to the
specifications by the select mode. (predefined)
(d = direct) Output 1 / 5 is hardwired to Input A / B and
electrically isolated to the SP218UXL processor. The input
termination is off.. [THRU]
(b = boost) Output 1 / 5 are connected via electrical
isolation and booster to Input A / B.
5.3.2 Output 8, 7 and 6, with RETIMER
Another adjustment is the number of exits these distribute a
DMX512 timing based of the integrated RETIMER. Outputs 8, 7 and
6 can be chosen. The last segment shows the numbers 0 to 3
according to the number of exits. (see chapter 7, RETIMER)
5.4 Set-up for [Merger, RETIMER, Cue, ..]
These attitudes need a special menu, the Setup. The reason is, as
soon as a change is confirmed they end the mode still running in
the background and executing a reset to the last mode.
!
This may cause an interruption in the DMX512 transmission.
Call Setup: M c b a
Summary of Contents for SP218UXL
Page 44: ...SP218UXL 19 44...