14
Timing Fogging Operation ..............................................................
Panel button control when DMX signals are not connected.
Press Function button, to select duration and setting
the value of duration, press UP/DOWN button to
adjust the value of the duration, the minimum 50
seconds, and the maximum 250 seconds.
The display on left shows duration is 52 seconds;
Press Function button, to select interval and setting
the value of interval, press UP/DOWN button to
adjust the value of the interval, the minimum 30
seconds, and the maximum 2000 seconds. The
display on left shows interval is 30 seconds;
Press Function button, to select fog VAL and setting
the smoke output, press UP/DOWN button to adjust
the value of smoke output to 0% or 10~100%.
The display on left shows volume is 100%;
Press Function button, to select water mist VAL and
setting the state of volume, press UP/DOWN button to
select the volume state ON/ OFF for AQUAFOG 2500,
and A(50%), B(50%) or A+B(100%) for AQUAFOG
3600. The display on left shows volume is ON for
AQUAFOG 2500, or A+B(100%) for AQUAFOG 3600;
Start the timing fogging, the duration and interval
of fogging are decreasing by the seconds. The
duration and interval process will circulate;
Press Function button, to select wind VAL and setting
the value of wind volume, press UP/DOWN button
to adjust the value of wind volume from 10~100%.
The display on left shows volume is 10%;
Duration
52
Interval
30
FOG VAL
100
WATER MIST VAL
ON or A+B
— —RUNNING— —
F100 D52 I30
WIND VAL
10
1.
2.
3.
5.
7.
4.
6.
After the completion of the values will be automatically stored, at this time
press Timer, into the timing fogging;
