7
Getting Ready
All products are thoroughly tested at the factory and shipped in
perfect condition. If damage has occurred during shipping, or if
components are missing, please contact your local dealer immediately.
Your package should include:
1
.
One AQUAFOG 2500 or AQUAFOG 3600
2
. One powerCON cable
3
. One product user manual
Set Up
1.
Open the shipping carton and carefully remove the low-fog machine
unit from the shipping carton;
2.
Be sure to remove packing material from around the low-fog
machine, especially near the outlet;
3.
Set the machine on a dry, flat surface;
4.
Use only high quality, water-based special low-fog fluid (Figure1-B);
5.
Fill the clean water to the tank (Figure1-C). Take care not to exceed
the warning water line and ensure the use of clean water. When
water is not enough, the machine will stop working automatically;
6.
Plug mains power cord from the machine into appropriate power
supply socket. Wait about 5-8 minutes for heating element to first
heat up;
7.
Use LCD display & Function buttons (Fiqure1-F & G) for operating
control, or connect DMX controller for setting;
8.
Or firmly attach the remote control mechanism to socket (Figure1-N)
on the back of the unit, refer to your controller manual for operation
details;
9.
When the low-fog machine is idle and not working, it is suggested
that the power supply be cut off immediately, the plug is pulled out,
and empty water and low-fog fluid from the machine.
