19
7.
Continuously press the “Function” button to switch between 1 channel
mode and 6 channel mode;
8.
If desired, connect another low-fog machine: Plug one end of another
signal cable in to the output socket (Figure 1-K or M) on the back of the first
AQUAFOG 2500 or AQUAFOG 3600; plug the other end of the signal cable
to the input socket (Figure 1-J or L) on the back of the second AQUAFOG
2500 or AQUAFOG 3600.
Follow the same procedure to link more low-fog machines, if desired;
whole link is daisy chain;
9.
Done! Refer to DMX channel chart in Figure 2 make related settings.
Now start operating Wig Smog with DMX console.
• Set values are automatically saved.
• Self-cleaning function: When the machine stops fogging, please do not
unplug the machine immediately, but wait 20 seconds to let the machine
automatically remove residual smoke from the machine.
This is to avoid causing negative effect when used next time. LCD screen
will show CLEANING. After the end of clearing, STANDBY will appear.
MT-4
Link more AQUAFOG 2500
or AQUAFOG 3600
IN
IN
IN
OUT
OUT
OUT