6
Menu functions
Stabila LD 500
D
GB
SLO
F
I
E
P
NL
N
FIN
DK
TR
CZ
PL
S
HR
H
SK
LV
LT
KOR
RUS
CHN
EST
GR
RO
key or the
key.
)
Parallax errors occur when the digital pointfinder is used on close
targets, the laser dot may appear displaced in the crosshair. In this case you
should rely on the actual laser dot for targeting the object.
See drawing {
F.2
}
1
Zoom step (1x, 2x, 4x)
2
Timer
3
Level (in °)
4
Crosshairs
5
Inclination angle
6
Distance tracking value
7
Image
Menu functions
Settings
Various device settings can be made in the menu. A vertical list shows each
entry. In this menu the selection field (cursor) remains stationary and the
list moves in a vertical direction. Starting from the centre of the list, the
priority of list entries starts at the top and fans out clockwise. See drawing
{
G
}.
The menu contains following items:
1
Timer
2
Laser continuous measurement mode
3
Display illumination
4
Digital Pointfinder image in black/white
5
Level in status field (in °)
6
Units of measurement (distance)
7
Long range mode
8
Units of measurement (angle)
9
Beep
10 Calibrate tilt sensor
11 Offset
12 Tripod
13 Reset
Navigation in the menu
The menu allows settings to be customized for a particular user or appli-
cation.
General description
Press and
hold
the
key to enter the Setup menu.
By pressing the
or
keys, navigate through the main menu
items in the menu.
Press the
key
briefly
to enter the submenu of the selected main
menu item.
By pressing the
or
keys you can make the alterations in the
submenu.
Press and
hold
the
key to accept the settings.
Pressing the
button
for longer
in the menu allows you to quit the
settings function without saving.
Timer (
)
The time delay (default value) can be changed using the
or
buttons. Pressing the button for longer increases the rate of change of the
values. When you reach the desired time delay value, confirm it with the
button.
