4
Start-up
Stabila LD 500
D
GB
SLO
F
I
E
P
NL
N
FIN
DK
TR
CZ
PL
S
HR
H
SK
LV
LT
KOR
RUS
CHN
EST
GR
RO
Labelling
Position of the product label see last page!
Start-up
Inserting/replacing batteries
See figure {
A
}
1
Remove battery compartment lid.
2
Insert batteries, observing correct polarity.
3
Close the battery compartment again. Replace the batteries when the
symbol
flashes permanently in the display.
)
Remove the batteries before any long period of non-use
to avoid the danger of corrosion.
)
Use alkaline batteries or rechargeable batteries only.
Changing the reference point (multifunctional
endpiece)
See figure {
B
}
The instrument can be adapted for the following measuring situations:
•
For measurements from an edge, fold out the positioning bracket until
it first locks in place. See figure {
C
}.
•
For measurements from a corner, open the positioning bracket until
it locks in place, then push the positioning bracket lightly to the right
to fold it out fully. See figure {
D
}.
A built-in sensor automatically detects the orientation of the positioning
bracket and adjusts the zero point of the instrument accordingly.
Laser Radiation
Do not stare into the beam
Laser class 2
acc. IEC 60825-1:2007
Maximum radiant power:
<1mW
Emitted wavelength:
620-690nm
Beam divergence
0.16 x 0.6 mrad
Pulse duration:
1 x 10
-9
s
