3
en
1. Intended use
Congratulations on the purchase of your STABILA measuring tool. The STABILA LAR 160 /
LAR 160 G is an easy-to-use rotation laser for horizontal and vertical levelling, including
obtaining plumb lines. The LAR 160 / LAR 160 G has a sealed enclosure (IP 65) for use on
building sites. It is self-levelling within a range of ± 5°.
The laser beam can be picked up using a receiver even where it can no longer be dis-
cerned with the naked eye.
LAR 160 G:
Receivers must be suitable for green laser beams.
If you still have questions after reading through the operating instructions, you
can obtain advice by telephone:
+49 / 63 46 / 3 09 - 0
1.800.869.7460 U.S. and Canada
Equipment and functions:
• Laser beam
• Rotation beam
• Manual mode
• Tilt mode
• Tripod socket
2. Safety instructions for laser units
In Class 2 laser units, your eyes are usually protected from accidental, short-term expo-
sure to the laser beam by the eyelid-closing reflex and/or the reflex reaction to turn
one’s head. If a laser beam hits your eye, deliberately close your eyes and move your
head out of the path of the beam. Do not look into the direct or reflected beam.
The STABILA laser goggles available for our laser units are not safety eyewear:
their function is to improve the visibility of the laser beam.
•
Do not aim the laser beam directly at people!
•
Avoid dazzling other people with the unit!
•
Keep the unit out of the reach of children!
•
If operating or adjustment equipment that has not been specified here is used, or
if the unit is not operated in the ways described here, this may result in hazardous
exposure to radiation!
LASER
2
LASER RADIATION
DO NOT STARE INTO BEAM
510 - 635 nm / <1mW
CLASS II LASER PRODUCT
CFR 1040.10 AND CFR 1040.11
