background image

17

Pentair Water Product Warranty

Pentair Water warrants that, when this product is used for the purpose it was designed, is correctly housed and vented against 
weather, vermin, dust etc., that it will be free of material and manufacturing defects at the time of the original purchase.

This warranty is limited to the cost of the product and does not cover third party costs including the costs of 
electricians, plumbers, etc. unless authorised by Pentair Water.

TERMS AND CONDITIONS APPLICABLE INTERNATIONALLY

How long the warranty is effective Internationally

1)   This Pentair Water product is warranted for 12 months for all parts from the date of the first consumer purchase. 

Should any parts fail as a result of such defects within the specified period, the part will be replaced free of charge. 

(This does not include travel charges, removal and reinstallation charges.)

TERMS AND CONDITIONS APPLICABLE IN AUSTRALIA AND

NEW ZEALAND

1)   YOU SHOULD CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING THIS PENTAIR    

WATER PRODUCT.  

 

 

This product is to be installed and operated in accordance with the instructions provided. 

This warranty will not apply if it is used in a manner other than in accordance with the instructions.

What the warranty covers:

Pentair Water warrants its products to be free of defects in material and workmanship during the warranty period.  

If a product proves to be defective in material or workmanship during the warranty period, then Pentair Water will, 

at its sole option

 

repair or replace the product with a like product.  Replacement product or parts may include 

re-manufactured or refurbished parts or components.

How long the warranty is effective: 

1)  This Pentair Water product is warranted for 36 months for all parts from the date of the first  

 

 consumer 

purchase.

2)   Authorised workshop labour will be free of charge for the first 12 month period from date of the first  

 

 consumer purchase when unit is found to have failed due to defective workmanship or material supplied by 

Pentair Water Australia.

 

 Infield service by an authorised Pentair Water Service Agent will incur a travel, removal & reinstallation fee 

payable by customer.

3)  Where this Pentair Water product is sold for commercial application as defined in the relevant Trade  

 

Practices and Consumer Protection legislation the warranty shall be for a period of six months from  

 

the date of purchase by the end user.

Who the warranty protects:

 

This warranty is valid only for the consumer purchaser.  

What the warranty does not cover:

1)  Damage, deterioration or malfunction resulting from:

 

a)   accident, misuse, negligence, fire, water, lightning, or other acts of nature, unauthorised product 

modification or failure to follow instructions supplied with the product;

 

b)  repair or attempted repair by anyone not authorised by Pentair Water;

 

c)  any damage to the product due to shipment;

 

d)  removal or installation of the product;

 

e)  causes external to the product such as electric power fluctuations or failure;

 

f)  use of supplies or parts not meeting Pentair Water specifications;

 

g)  normal wear and tear;

Summary of Contents for SilentFlo SF1100100





















Reviews: