STA-RITE SilentFlo SF1100100, Owner'S Manual

Page: 4 / 20

3
Incorrectly installed or tested equipment may fail, causing severe injury
or property damage.
Read the following instructions in this owner’s manual
when installing and operating equipment. Have a trained
pool professional perform all pressure tests.
1. Do not connect system to high pressure or mains
water system.
2. Use equipment only in a swimming pool or spa pool
installation.
3. Install pump with at least 2 hydraulically balanced
main drains equipped with correctly installed, screw -
fastened, antientrapment certifi ed covers according
to local regulations.
4. Trapped air in system can cause explosion.
Ensure all air is out of the system before operating or
testing equipment.
Silentfl o is electrically connected. Ensure that it is isolated
from electrical supply during installation and any subsequent
service work.
The pump should be installed and serviced by a suitably
qualifi ed person in order to avoid hazard.
These instructions are a guide only. Should you the installer or
owner of the product be unfamiliar with the correct installation
or operation of this product you should contact a suitably
qualifed person for advice.
Freezing conditions will damage the unit, as water expands as
it freezes. Ensure that Silentfl o is located so that it is not prone
to freezing, or ensure that the product is disconnected and
dried of water during cold conditions.
Installation