1
Important Precautions
1.
This model mainly applies to swimming pool with flat floor; please refer to instruction of 3)
in 5.3.2 for swimming pool with slope.
2.
In order to prevent severe damage to the cleaner, never power on the unit when it is
outside of the swimming pool.
3.
The power cord must be connected to leakage protective device and appropriate earthed
socket.
4.
Do not operate the cleaner when people are in the pool.
5.
Do not try to move the floaters along the electric cable. Leave them always in the original
positions.
6.
Before power on, make sure the cable is fully released to avoid any winding, which could
affect the cleaner’s performance or cause damage.
7.
The filter bags should be cleaned every time you use the unit. This will prevent the dirty
filter bags affecting the normal operation of the cleaner.
8.
The cleaner should be stored in a cool and ventilated place, away from direct sunlight,
when not in use.
9.
The power supply unit should be placed in a shaded area. In order to avoid overheating
and the potential damage of components, never cover the power supply unit.
10.
Only authorized after sales service personnel should open the cleaner’s motor assembly
and power supply unit, otherwise the warranty will be invalidated.
11.
In order to avoid any accident/damage, the power supply unit should be steadily placed
at a minimum distance of 3.5m from the pool edge.
12.
Do not use the cleaner beyond the working environment/conditions stated in this manual.
13.
Do not uncover the protective film which is sticked on the operating panel.
14.
Close the filtering system of your pool when use this cleaner.
