28
Level adjustment IPVS 600-...
Setting the volume of the PC user in
the direction of the door station.
•
Set the optimum volume at the
door loudspeaker for Siedle Multi
users.
•
Establish the connection to the PC.
•
At the PC, open the configuration
menu of the Software Client and
select the tab “Speech volume“.
•
Using the “Microphone“
controller, starting from 0% adjust
the volume in the direction of the
door in such a way that the same
volume is achieved as for the Siedle
Multi users.
As a rule, the optional field
microphone amplifier remains
switched on. This field can only
be switched off in the case of
microphones with a very high output
level.
•
If the control range of the
microphone controller is not
sufficient to achieve an optimum
volume in the door loudspeaker, the
SIM 740-0 with SW1 offers a switch
for level selection.
SW1:
OFF = 0 dB (as-delivered status)
ON = +9 dB
Level adjustment TLM 645-...
Setting the volume of the PC
user from the door station in the
direction of the PC user.
•
Establish the connection to the PC.
•
At the PC, select Reproduction in
the volume menu.
Ensure that “Tone off“ has been
selected under the heading
Microphone.
•
Using b and –, set the
optimum volume (starting from 0%).
•
To ensure that the levels are
stored, these must be performed via
the configuration menu.
7 Setting the speech volume
Level adjustment DCIP 740-...
Level adjustment DCA 740-01
Set the volume of the speech
connection to the telephone system.
•
Set the optimum volume at the
door loudspeaker for Siedle Multi
users.
•
Establish the link to the TC system
or public network telephone.
•
Using potentiometer P1 in the
DCA 740-01, set the optimum
volume at the door. If applicable, the
switch SW1 in the SIM 740-0 must
be set to ON.
•
With potentiometer P2 in the
DCA 740-01, set the optimum
volume in the receiver.
(Comparison: Normal volumes with
public network calls).
