SSANGYONG REXTON II 2006, Owner'S Manual

Page: 65 / 322

INTERIOR SWITCHES
4-9
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
RAIN SENSING WIPER*
When the wiper switch is in the
“AUTO”
position, this sensor detects the
amount of rain, turns on the wiper, and controls the intermittent wiper intervals.
Rain and Auto Light Sensor
Wiper AUTO Position
It controls the wiping speed by detect-
ing the amount of rain drops.
When you clean the windshield over the sensor with damp clothes, the wiper may
operate suddenly. It could cause serious injury. Make sure to place the wiper switch
and ignition switch to the “OFF” position when not in use.
WARNING
• When the wiper switch is in the “AUTO” position, the wiper will operate once if
the initial engine start is made. This may wear the wiper blades prematurely
(especially in winter). Therefore, other than rainy days, set the switch to the
“OFF” position. In winter, ensure that the wiper blades are not frozen and are
not stuck to the windshield. Otherwise, this may cause some damage to the
wiper motor.
• If you use only the wipers when the glass is dry, this could scratch the glass and wear
the wiper blades prematurely. Use the wiper with the washer when the glass is dry.
• Turn the wiper switch to the “OFF” position before any car wash to avoid un-
wanted operation of the wipers.
• When it does not rain, turn the wiper switch into the “OFF” position.
CAUTION
• When the light switche is in the “AUTO” position,
head lights come on if the rain sensor detects any
rain.
• The speed of the wipers becomes a little faster
when it is dark enough to turn on the automatic lights.
• When the ignition key is in the “ON” position, the
wiper will automatically operate once if the wiper
switch is turned from the “OFF” to the “AUTO”
position. But the wiper will not operate again to
prevent any damage to the window even though
the wiper switch is turned from the “OFF” position
to the “AUTO” position.
NOTE
AUTO
Y250_04-Interior Switches_RHD.p65 2006-05-16, ¿ÀÈÄ 3:11 Page 9 Adobe PageMaker 6.5K/Win