SSANGYONG REXTON II 2006, Owner'S Manual

Page: 40 / 322

IGNITION KEY, REMOTE CONTROL KEY
2-8
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CAUTIONS WHEN STARTING THE ENGINE
• To unlock the steering wheel, insert the key and gently
turn it to the
“ACC”
position while slightly moving the
steering wheel right and left.
• The engine in a manual transmission equipped vehicle
can only be started when the clutch pedal is fully
depressed.
• Diesel engine equipped vehicle: Turn the ignition key
to the
“ON”
position and wait until the glow indicator
goes out. After then, turn the ignition key to the
“START”
position and hold it until the engine starts.
But do not hold the ignition key at the
“START”
posi-
tion for more than 10 seconds.
• The engine in an automatic transmission equipped ve-
hicle can be started only when the selector lever is at
the
“P”
or
“N”
position.
• Keep the brake pedal depressed when starting the
engine.
• If the engine fails to start, even if the engine does not
start, turn the key back to the
“LOCK”
position and
wait for 10 seconds. Then try again, before any attempt
to start the engine.
• After starting the engine, let it run for approx. 2 minutes
at idle speed. Do not accelerate the engine during the
warming up period.
• A warning buzzer sounds when opening the driver’s door
with the key positioned at the
“ACC”
or
“LOCK”
position.
• Do not leave the key at the
“ACC”
or
“ON”
position
when engine is not running. Otherwise, the battery could
run down.
• Never press down the accelerator pedal while starting.
• Do not operate the starter for more than 10 seconds at
a time. (The starter motor may be damaged.)
• To prevent any damage to the starter, restart the en-
gine from the “
LOCK
” position after waiting at least
10 seconds.
• Never turn the key to the
“LOCK”
position or with-
draw the ignition key from the ignition switch while
driving. The steering wheel will be locked and you may
end up with serious injuries.
• Never use any duplicated key not provided from
Ssangyong.
The duplicated key might not turn back to the
“ON”
position. It may cause a fire due to an overload in the
electric circuit. In addition, the engine with the immobi-
lizer system cannot be started with the duplicated key.
Y250_02-Ignition Key, Remote Control Key_RHD.p65 2006-05-16, ¿ÀÈÄ 3:10 Page 8 Adobe PageMaker 6.5K/Win