SSANGYONG REXTON II 2006, Owner'S Manual

Page: 143 / 322

SEATS
7-7
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
POSITION MEMORY SETTING*
To Recall the Memory Settings
To Store the Memory Settings
The position memory is available for up to three drivers. Each driver can set his/ her own driver’s seat and outside rearview
mirror positions. The information will individually be stored in the integrated computer. If somebody has moved the seat, the
memory positions can be recalled automatically by pressing the position button.
1. Position the transmission shift lever to “P” with the igni-
tion switch “ON” (for your safety, do not start the engine).
In case of a manual transmission vehicle, you must ap-
ply the parking brake too.
2. Adjust the driver’s seat and outside rearview mirrors to
the desired positions.
3. Press the (SET) switch. The indicator on the switch comes on.
4. Within 5 seconds, press and hold one of the position but-
tons ( ), ( ), ( ) you want to set. When the
memory setting is completed, a buzzer sounds twice.
1. Press and hold one of the position buttons ( ), ( ), ( )
you want until the buzzer sounds.
2. The driver’s seat and outside rear view mirrors start to move to
the stored positions. If you drive off during this recalling process,
this automatic memory setting stops operating.
3. Wait until they stop moving.
4. When the process is completed, a buzzer sounds twice.
SET button
STOP button
Position button
(1, 2, 3)
• The automatic positioning operation stops when operating any seat
adjusting switch or the outside rearview mirror adjusting switch dur-
ing its operation. To erase the memorized seat and outside rear-
view mirror positions, press the “STOP” button.
• If you do not press any position button within 5 seconds after press-
ing “SET” switch, the memory setting is cancelled.
CAUTION
Y250_07-Seats_RHD.p65 2006-05-16, ¿ÀÈÄ 3:12 Page 7 Adobe PageMaker 6.5K/Win