manualshive.com logo in svg

SSANGYONG KORANDO 2005, Owner'S Manual

The SSANGYONG KORANDO 2005 Owner's Manual is a comprehensive guide for owners of this exceptional SUV. Find all the necessary information, including maintenance tips, troubleshooting advice, and vehicle specifications, all available for free download at manualshive.com. Explore the in-depth manual to master your SSANGYONG KORANDO 2005 with ease.

Share
Download
background image

INSTRUMENTS AND CONTROLS  3–21

PASSING LIGHT SWITCH

To flash the high beam, pull the lever to-
wards the steering wheel and release it.
The lever will be returned to the normal po-
sition when released.
The high beam headlights stay on as long
as you hold the lever.

FRONT FOG LAMP SWITCH*

Fog lamps provide auxiliary illumination and
improve vision in fog or snow.
To turn on the front fog lamps, rotate the fog
lamp knob on the combination switch lever
to the  

  or  

  position.

To turn off the front fog lamps, rotate the
fog lamp knob to “OFF” position.

WINDSHIELD WIPER SWITCH

To operate the windshield wipers, move the
wiper lever in 3 downwards steps with the
ignition on.

OFF

= off

AUTO = Automatic wipe
LO

= Continuous wipe, slow speed

HI

= Continuous wipe, fast speed

K140_RHD_EN_03.p65

2004-11-11, ¿ÀÈÄ 4:08

21

Summary of Contents for KORANDO 2005























































































































































































































Reviews:

No comments

Related manuals for KORANDO 2005

AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
Yakima Landing Pad 24 Quick Start Manual preview
Landing Pad 24
Brand: Yakima Pages: 11
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
Kargo Master 8006A Instruction Manual preview
8006A
Brand: Kargo Master Pages: 19
Safe Fleet PRIME DESIGN VBR3-FT31B Manual preview
PRIME DESIGN VBR3-FT31B
Brand: Safe Fleet Pages: 12
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
Fab Fours C3150 Installation Instructions Manual preview
C3150
Brand: Fab Fours Pages: 21
Toyota 2012 Sienna Owner'S Manual preview
2012 Sienna
Brand: Toyota Pages: 779
Rydeen BSS2 Owner'S Manual preview
BSS2
Brand: Rydeen Pages: 14
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Alu-Cab SH-BKT-RC-TY Fitment Instructions preview
SH-BKT-RC-TY
Brand: Alu-Cab Pages: 6
walser Proguard 100021 User Instructions preview
Proguard 100021
Brand: walser Pages: 12
Crux Sightline VIMFD-95 Manual preview
Sightline VIMFD-95
Brand: Crux Pages: 2

Brands by name

Popular brands

Load more brands