manualshive.com logo in svg

SSANGYONG KORANDO 2005, Owner'S Manual

The SSANGYONG KORANDO 2005 Owner's Manual is a comprehensive guide for owners of this exceptional SUV. Find all the necessary information, including maintenance tips, troubleshooting advice, and vehicle specifications, all available for free download at manualshive.com. Explore the in-depth manual to master your SSANGYONG KORANDO 2005 with ease.

Share
Download
background image

4–14  VENTILATION, HEATING AND AIR CONDITIONING*

Air recirculation switch

By pressing the switch, outside air intake
mode and recirculation mode changes
alternatively.
When the fresh air intake mode is selected,
indicator ( 

 ) comes on. Recirculation

mode is selected ( 

 ) indicator comes

on. When the switch is operated, the AUTO
indicator goes out.

NOTE

When pressing the defroster (

)

switch in air recirculation mode, the
air flow direction is automatically
changed to the fresh air intake mode.

WARNING

•

Continued operation in the
recirculation mode could cause
interior to become stuffy and
windows to fog up. Use recirculation
mode in short period of time. And,
it may cause a deadly intoxication if
carbon  monoxide has already flown
into the passenger compartment. After
paseed through the contaminated
area, press the recirculation switch
again to draw outside air into the
passenger compartment.

•

In rainy or high humid condition,
the difference between the outside
air and the temperature of the
windshield may cause the windows
to fog, thereby restricting your
view. This can lead to an accident
which can damage your vehicle
and cause personal injuries. In
this case, select the fresh air intake
mode with the recirculation switch
and press the defroster (

)

switch to remove the fog on the
windshield.

K140_RHD_EN_04.p65

2004-11-11, ¿ÀÈÄ 4:08

14

Summary of Contents for KORANDO 2005























































































































































































































Reviews:

No comments

Related manuals for KORANDO 2005

Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
RAM Ram 3500 2012 Specifications preview
Ram 3500 2012
Brand: RAM Pages: 13
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180
XTC RZR-SW-USB-2B Manual preview
RZR-SW-USB-2B
Brand: XTC Pages: 2
Stack ROLL POD Installation Manual preview
ROLL POD
Brand: Stack Pages: 4
UCANDAS VDM Instruction Of Quick Operation preview
VDM
Brand: UCANDAS Pages: 4
FALCON RIDGE CF-U-1000-RW02 Instructions For Installation And Care preview
CF-U-1000-RW02
Brand: FALCON RIDGE Pages: 8
Buzz Rack Atomic Buzz Manual preview
Atomic Buzz
Brand: Buzz Rack Pages: 8
Funkwerk EGO FLASH Operating Manual preview
EGO FLASH
Brand: Funkwerk Pages: 58
ACV 381094-36-1 Install Manual preview
381094-36-1
Brand: ACV Pages: 12

Brands by name

Popular brands

Load more brands