manualshive.com logo in svg

SSANGYONG KORANDO 2005, Owner'S Manual

The SSANGYONG KORANDO 2005 Owner's Manual is a comprehensive guide for owners of this exceptional SUV. Find all the necessary information, including maintenance tips, troubleshooting advice, and vehicle specifications, all available for free download at manualshive.com. Explore the in-depth manual to master your SSANGYONG KORANDO 2005 with ease.

Share
Download
background image

1–34  BEFORE DRIVING YOUR CAR

Driver’s Air Bag*

The driver’s air bag is stored in the center
pad of the steering wheel.
The air bag inflates within milliseconds dur-
ing a crash and forms a safety cushion for
the driver. After the air bag completely in-
flates, it immediately deflates so that it does
not interfere with the driver’s visibility or
ability to steer and operate other controls.
The air bag inflates with considerable force
and speed. It is therefore important that the
driver’s seat and seat back should be cor-
rectly adjusted, for the air bag to be fully
effective. The driver’s seat should be ad-
justed so that the steering wheel can be
reached with the arms slightly angled.

CAUTION

Protection of occupants could be lim-
ited.
• Do not stick anything on steering

wheel and instrument panel.

• Do not cover steering wheel and

instrument panel with other mate-
rials.

CAUTION

Under the following conditions the air
bag system will not be triggered.
• Rear impacts
• Side impacts
• Rollovers
• Minor frontal collisions

CAUTION

Treatment by unauthorized persons
could be dangerous and cause inju-
ries.
• The air bag system must only be

disposed by Ssangyong Dealer.

• The air bag system must only be

replaced by a Ssangyong Dealer.

WARNING

Occupant could be injured.
• Wear seat belt at all time.
• Air bag system serves as supple-

ment to the seat belt.

WARNING

Alternation of component could in-
jure someone.
• Do not modify original

components.

K140_RHD_EN_01.p65

2004-11-11, ¿ÀÈÄ 4:08

34

Summary of Contents for KORANDO 2005























































































































































































































Reviews:

No comments

Related manuals for KORANDO 2005

Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
Safe Fleet PRIME DESIGN VBI-FT21B Manual preview
PRIME DESIGN VBI-FT21B
Brand: Safe Fleet Pages: 12
Honda Plusone Console 4521011B User Information preview
Plusone Console 4521011B
Brand: Honda Pages: 4
Buick Electra 225 1965 Service Manual preview
Electra 225 1965
Brand: Buick Pages: 914
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
Demco TP20047 Assembly Operation Replacement Parts preview
TP20047
Brand: Demco Pages: 4
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
TATA Motors Indigo LE Owner'S Manual & Service Book preview
Indigo LE
Brand: TATA Motors Pages: 151
Thule QUICKDRAW RACHET TIE-DOWNS 855 User Manual preview
QUICKDRAW RACHET TIE-DOWNS 855
Brand: Thule Pages: 3
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Volvo 1997 850 Service Manual preview
1997 850
Brand: Volvo Pages: 62
Carbest 47804 Instruction Manual preview
47804
Brand: Carbest Pages: 64
Honda 08F53-T0A-100 Installation Instructions preview
08F53-T0A-100
Brand: Honda Pages: 2
Federal Signal Corporation Cuda TriOptic 351014F Series Instruction Sheet preview
Cuda TriOptic 351014F Series
Brand: Federal Signal Corporation Pages: 4
Kia Magentis 2002 Owner'S Manual preview
Magentis 2002
Brand: Kia Pages: 216

Brands by name

Popular brands

Load more brands