SSANGYONG KORANDO 2005 Owner'S Manual Download Page 191

Page: 191 / 214

VEHICLE CARE 8–7

Turning the Engine Off when Taking a Nap

You might cause an accident by uncon-
sciously shifting the transaxle or stepping on
the accelerator pedal, so turn the engine off.

CAUTION

Repeated application of the accelera-
tor pedal overheats the engine and
exhaust pipe and might cause a fire.

Turning the Engine Off when Leaving

Your Car

•

Turn the engine off and lock the doors.

•

Do not leave valuables inside the car;
help children out of the car.

Moving Your Vehicle Only After Start-

ing the Engine

Move your vehicle only after having started
the engine.

WARNING

Driving the vehicle downhill using
the downgrade slope without run-
ning the engine might cause an
accident.

Parking Downhill

After firmly applying the park brake, set the
gearshift lever in Reverse for the vehicle
with manual transmission or set the gear-
shift lever in

for vehicle with automatic

transmission.

CAUTION

Place wheel chocks under the wheels.

Parking Uphill

After firmly applying the park brake, set the
gearshift lever in first gear for vehicle with
manual transmission or set the gearshift lever
in

for vehicle with automatic transmission.

CAUTION

Place wheel chocks under the wheels.

When Parking or Stopping in an En-

closed Place

When parking or stopping in an enclosed
place, turn off the engine.

WARNING

Leaving the engine running in an
enclosed place, in a garage or in-
doors or in other areas with no air
circulation, might result in death
from carbon monoxide poisoning.

Things to Watch for when Backing Up

When backing up your vehicle, always make
sure that there are no children or other ob-
stacles behind the car.

K140_RHD_EN_08.p65

2004-11-11, ¿ÀÈÄ 4:09

Summary of Contents for KORANDO 2005























































































































































































































Search results

Summary of Contents for KORANDO 2005

Reviews:

Related manuals for KORANDO 2005

Brands by name

Popular brands

SSANGYONG KORANDO 2005, Owner'S Manual

Search results

Summary of Contents for KORANDO 2005

Reviews:

Related manuals for KORANDO 2005

Brands by name

Popular brands