manualshive.com logo in svg

SSANGYONG KORANDO 2005, Owner'S Manual

The SSANGYONG KORANDO 2005 Owner's Manual is a comprehensive guide for owners of this exceptional SUV. Find all the necessary information, including maintenance tips, troubleshooting advice, and vehicle specifications, all available for free download at manualshive.com. Explore the in-depth manual to master your SSANGYONG KORANDO 2005 with ease.

Share
Download
background image

7–24  SERVICE AND MAINTENANCE

CATALYTIC CONVERTER*

The catalytic converter is located between
exhaust manifold and center muffler. The
catalytic converter consists of monoliths
with honeycomb shaped structure of ce-
ramic material which are elastically mounted
in a mat.
This precious metal coating on the monoliths
accelerate the reduction and/or oxidation of
toxic components.
On vehicles with a catalytic converter for
unleaded fuel, lead fuel will damage the
catalytic converter and parts of the elec-
tronic system, thereby rendering them inop-
erative.

Damage to the Catalytic Converter or

the Vehicle May Result If the Following

Points Are Not Observed :

•

Consult a Ssangyong Dealer or
Ssangyong Authorized Service Opera-
tion as Quickly as possible in the event
of misfiring, irregular engine running fol-
lowing a cold start, a significant loss of
engine power or other unusual malfunc-
tions which may indicate a fault in the
ignition system.
If necessary, driving may be continued
for a short time at a low speed and with
low engine revolutions.

PARKING BRAKE

Check the stroke of the parking brake by
counting the number of notch clicks heard
while fully applying it from the released po-
sition.
Also, the parking brake alone should se-
curely hold the vehicle on a fairly steep
grade. If the number of clicks is more or less
than specified, have the parking brake ad-
justed by a Ssangyong Dealer or
Ssangyong Authorized Service Operation.

Stroke

4~7 notches at a
force of 20kg

K140_RHD_EN_07.p65

2004-11-11, ¿ÀÈÄ 4:09

24

Summary of Contents for KORANDO 2005























































































































































































































Reviews:

No comments

Related manuals for KORANDO 2005

AA Products KX405 Instruction Manual preview
KX405
Brand: AA Products Pages: 8
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
Yakima StickUp Installation Instructions Manual preview
StickUp
Brand: Yakima Pages: 21
Phonocar VM350 Mounting Instructions preview
VM350
Brand: Phonocar Pages: 2
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
Würth 071554055 User Instructions preview
071554055
Brand: Würth Pages: 36
Mitsubishi MIrage 2019 Owner'S Handbook Manual preview
MIrage 2019
Brand: Mitsubishi Pages: 19
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
Abrams RE-47X Installation And Operation Manual preview
RE-47X
Brand: Abrams Pages: 12
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
PUTCO 1951 Series Instruction Manual preview
1951 Series
Brand: PUTCO Pages: 3
Whispbar K684W Fitting Instructions Manual preview
K684W
Brand: Whispbar Pages: 15
Fabbri BICI OK 2 Manual preview
BICI OK 2
Brand: Fabbri Pages: 32
Whelen Engineering Company SAK34 Installation Manual preview
SAK34
Brand: Whelen Engineering Company Pages: 2
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
Setma E12PE27000 Instruction Manual preview
E12PE27000
Brand: Setma Pages: 13

Brands by name

Popular brands

Load more brands