SS Telecoms SS-76 NG, User Manual

Page: 3 / 19

SS-76 NG USER MANUAL
DOC. NO: SS-76 NG (REVISION 05) Page 3 of 19
1. PURPOSE
The purpose of the SS-76NG is that of a multifunction data buffer. It is designed to
collect data from a variety of sources (primarily PABXs) using various protocols.
The data can then be retrieved from the SS-76NG using a number of different
methods. This allows the buffer to be used where the link between the data
processing solution and the data source may be intermittent or otherwise prone to
data loss.
The SS-76NG can also be used to provide remote access to serially connected
equipment (RS-232) by Ethernet.
The data can optionally be time stamped by the buffer.
2. FEATURES
FEATURES
Memory capacity of 8 megabytes Battery backup
LEDs to indicate buffer status 10MBit or 100MBit Ethernet operation
Dongle Function Built-In tests for

Supply voltages

LEDs
Hardware Reset Button

Allows loading of default settings
Audio Beeper

Alerts users to status changes

Warnings of system failures
Data collection options

Via Serial ports
o
Port 1 - Baud rates from 1200
baud to 115200 baud
o
Port 2 - Baud rates from 1200
baud to 19200 baud

Via Ethernet
o
Active TCP/IP
o
Passive TCP/IP
o
UDP (e.g. Syslog)
Data retrieval

Via Serial Port
o
Auto Dump using handshake line
o
ASCII protocol („S<enter>‟ to
retrieve a record)

Via Ethernet
o
NetLog standard protocol
o
UdpLog standard protocol
o
Auto Dump on Ethernet
connection.

Via GPRS
o
UdpLog standard protocol
Protocol translation

Alcatel 4400

Binary

ASCII

STX-ETX

LG Opticon

ISDX

RoboDog

Syslog

Avaya

IPS 2000

CPU 3000
– 4000

FTP
Supports the following Internet Protocols

DHCP

SNTP

NBNS

DNS

TCP

UDP