SS Telecoms SS-76 NG, User Manual

Page: 15 / 19

SS-76 NG USER MANUAL
DOC. NO: SS-76 NG (REVISION 05) Page 15 of 19
8.1 ALCATEL 4400 RELATED COMMANDS
ALCATEL 4400 COMMANDS
The Alcatel 4400 is logged using an IP connection. The PABX acts as the server and the buffer
connects to it as a client.
Command Description
ALI <IP address>
This sets that IP address of the Alcatel 4400 PABX. The port number is
fixed at 2533 and therefore does not need to be set.
8.2 AVAYA DEFINITY RELATED COMMANDS
AVAYA DEFINITY COMMANDS
The Avaya Definity acts as a client and needs to connect to the SS-77. The SS-77 needs to have
its local port set. It has been found in the field that the PABX can sometimes stop outputting data.
A simple solution was to „prompt‟ the PABX by sending it a character. In the SS-77 this character
will be sent every 60 seconds if it is set to something other than 0xFF.
Command Description
AVL <Local Port>
This sets that port number at which the SS-77 should listen for incoming
connections. Some Avaya documentation suggests using port 50000. It
is probably not critical, as long as the PABX and the SS-77 have the
same settings.
AVP <Prompt
Character>
This sets the character code to be used as a prompt for the PABX. It is
set in hexadecimal. An empirically determined code that has been used
successfully is the X-ON (0x11) code.
The command to set this is: AVP 11
To disable the prompt set the code to 0xFF using: AVP FF
8.3 LG OPTICON IP RELATED COMMANDS
LG OPTICON IP COMMANDS
The LG Opticon can be logged on its serial port or on the LAN. On the serial port the logging is
pretty straight forward ASCII logging. For the IP port there are a number of settings.
Command Description
LGI <IP address> This sets that IP address of the PABX.
LGD <port number>
This sets that port number on which the PABX is listening. Normally
port 23 will be used.
LGS <port number>
This sets that port number from which the connection is initiated by the
buffer. The port number should be fixed, so that badly terminated IP
connections will reconnect on the same PABX socket. Typically a port
number of 1023 should be satisfactory.
LGT <timeout>
This sets the timeout for receiving records in minutes. If a record has
not been received for this number of minutes the IP link is closed and
re-opened after 30 seconds.