42
Remote Bleed Syringe Preparation
5 0 / 2 0 0 H o u r S e r v i c e
R e m o t e B l e e d S y r i n g e P r e p a r a t i o n
Fill a RockShox® bleed syringe with 20 mL of Reverb™ hydraulic fluid.
Hold the syringe upright, cover the tip with a rag, and gently depress
the plunger to purge any air bubbles from the syringe.
NOTICE
Only use the syringes included with the RockShox Bleed kit.
Do not use syringes that have been in contact with DOT brake fluid.
DOT brake fluid will permanently damage the seals and cause the
seatpost to malfunction.
Use a T10 TORX
®
wrench to remove the bleed screw from the remote.
Install the syringe with 20 mL of fluid into the remote bleed port.
⚠
WARNING
Do not allow Reverb hydraulic fluid to come into contact with any brake
components. Contaminated brake components can compromise brake
performance, may cause brake failure, and can lead to serious injury
and/or death.
To continue with the remote bleed, proceed to
Remote Lever Bleed
.
1
Reverb Hydraulic Fluid
20 mL
2
T10