12
Seatpost Removal
Use a 4 mm hex wrench to remove the saddle clamps and saddle from
the seatpost.
Use a 9 mm socket to remove the air cap from the post head.
Use a small hex wrench or pick to depress the Schrader valve and
release all air pressure from the air chamber.
⚠
WARNING - EYE HAZARD
Verify all pressure is removed from the seatpost before proceeding.
Failure to do so can cause the inner seal head and inner shaft to
separate from the upper post assembly at high velocity during
disassembly. Wear safety glasses.
Use a wrench, or quick release lever, to loosen the seatpost collar.
5
T25
6
9 mm
7
Hex wrench or pick
8