SRAM Reverb Stealth2017, Service Manual, Page: 40 / 50

40 Connect to Seatpost
Hose barb : Thread the hose barb into the poppet valve cover. Use a
7 mm open end wrench to hold the hose barb in position and use a
10 mm crowfoot socket and torque wrench to tighten the poppet valve
cover to 3.4-4.5 N•m (30-40 in-lb).
Connectamajig™ Hose Coupler (pictured in Step 1): Connect the hose
coupler to the Connectamajig coupler. Use your fingers to push the
Connectamajig hose coupler into the Connectamajig coupler until it
stops.
Thread the hose coupler into the Connectamajig coupler by turning
the coupler collar clockwise. Use a 6 mm open end wrench to hold the
hose fitting. Use a 9 mm crowfoot socket and torque wrench to tighten
the Connectamajig coupler collar to 1.1-2.9 N•m (10-26 in-lb).
Connectamajig Coupler (optional): If the Connectamajig coupler was
removed, thread the coupler into the poppet valve cover. Hold the
coupler in position with a 9 mm open end wrench, and use a 10 mm
crowfoot socket and torque wrench to tighten the poppet valve cover
to 3.4-4.5 N•m (30-40 in-lb).
1 2
10 mm 3.4-4.5 N•m (30-40 in-lb)
9 mm 1.1-2.9 N•m (10-26 in-lb)
10 mm 3.4-4.5 N•m (30-40 in-lb)