NORMAL SOUNDS
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
All the illustrations in this manual are for explanation purpose only. Your air
conditioner may be slightly different. The actual shape shall prevail.
NOTE:
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the control panel as shown below and all its
functions, then follow the symbol for the functions you desire.
The unit can be controlled by the unit
control alone or with the remote.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
DECREASES
TEMPERATURE
OR TIME
INCREASES
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME OR ERROR CODES
ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
ENERGY
SAVER MODE
SLEEP MODE
UNIT CONTROL
Temp
Temp
Timer
Timer
On
Off
Sleep
Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Fan
Mode
Follow
Me
Energy
Saver
On/Off
SET FAN SPEED
FOLLOW ME INDICATOR
TURNS UNIT
ON OR OFF
9
TO TURN UNIT ON OR OFF:
Press
ON/OFF button to turn unit on or off.
NOTE:The unit will automatically initiate energy Saver
function under Coo, Dry and Auto modes.
TO CHANGE TEMPERATURE SETTING:
Press
/
LEFT/RIGHT button to change
temperature setting.
NOTE:Press or hold either Right ( ) or Left ( ) button
until the desired temperature is seen on the display.
This temperature will be automatically maintained
(between 62
°F/17°C to 86°F/30°C).
If you want the
display to show the actual roomtemperature, refer to "
Operate on Fan Only" section.
REMOTE SIGNAL
RECEPTOR
Press Check filter button to initiate this feature.
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED light will
illuminate after 250 hours of operation. Once filter
has been cleaned, press this button to reset.
CHECK FILTER FEATURE:
