4
INSTALLATION INSTRUCTIONS
Read these instructions completely
and carefully.
IMPORTANT-
Save these
instructions for local inspector s use.
IMPORTANT-
Observe all
governing codes and ordianaces.
Note to Consumer
-
Keep these
instructions for futrue reference.
Note to Installer
-
Be sure to leave these
instructions with the Consumer.
Completion time
-
Approximately 1 hour.
Skill level
-
Installatio of this appliance
requires basic mechanical skills.
We recommend that two people install
this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper installation
is not covered under the Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
BEFORE YOU BEGIN
CAUTION
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of the air conditioner.
Aluminum house wiring may present special
problems- consult a qualified electircian.
When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins located on
the front and rear coils.
TOOLS YOU WILL NEED
Phillips
Screwdriver
Leveler
TOOLS YOU MAY USE
Slotted Screwdriver
Pencil
Ruler or tape measure
Scissors or knife
Save Carton and these Installation Instructions
for future reference. The carton is the best way
to store unit during winter or when not in use.
NOTE:
H
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 23 to 36 inches(584mm to 914mm) .
WINDOW REQUIREMENTS
Model
WA-60FMS1
WA-80FMS1
WA-10FMS1
WA-12FMS1
Table 1
Min vertical
opening
14" (356mm)
15.5" (394mm)
