ZOOM 300 User manual Revision 03 January 2015
3.3.1 Status LEDs
LEDs status
Description
ZOOM300 is powered off
The system is initializing. This state appears few seconds after power on
The system is ready and waiting for user input
System error. Use the controller to check the failure on Status section.
Scan initialization
ZOOM300 is busy working on something (performing a scan, for example)
ZOOM300 is storing data
Scan successfully completed
A new system controller firmware is uploading
An indeterminate state. Something gone wrong
Low battery. Please change the battery before continuing to work
Internal temperature is above warning threshold
Table 5: Status LEDs
Off
Blinking
Solid light
Summary of Contents for ZOOM 300
Page 1: ...User Manual Revision 03 January 2015...
Page 45: ......
