SPS ZOOM 300, User Manual

Page: 12 / 45

ZOOM 300 User manual Revision 03 January 2015
1.11.8 Ecological information
When properly used or disposed, MIDAREX Lithium‐Ion rechargeable batteries can be recycled
and do not present environmental hazard during their life time.
1.11.9 Disposal considerations
Dispose in accordance with applicable regulations, which vary from country to country.
Lithium‐Ion batteries should have their terminals insulated and be preferably wrapped in
individual plastic bags prior to disposal.
Incineration: incineration should never be performed by battery users but eventually by
trained professionals in authorized facilities with proper gas and fumes treatment.
Recycling: send to authorized recycling facilities.
1.11.10 Handling and Storage
Use the battery properly according to the product specification, do not disassemble or short
circuit the battery.
Store away from sources of heat or ignition: over high temperature will make the cell inflate
melt the separator, causing short circuit.
The storage area should be cool, dry, well ventilated, out of direct sunlight, away from metal
or
sharp edge, such as keys pins or wires.
1.12 About User
1. This product is for professional use only!
The user is required to be a qualified surveyor or have a good knowledge of surveying,
in order to understand the user manual and safety instructions, before operating,
inspecting or adjusting.
2. Wear required protectors (safety shoes, helmet, etc.) when operating.
1.13 Exceptions from Responsibility
1. The user of this products is expected to follow all operating instructions and make
periodic checks of the product’s performance.
2. The manufacturer assumes no responsibility for results of a faulty or intentional usage
or misuse including any direct, indirect, consequential damage and loss of profits.
3. The manufacturer assumes no responsibility for consequential damage and loss of
profits by any disaster, such as earthquakes, storms, floods etc.
4. The manufacturer assumes no responsibility for any damage and loss of profits, due to
a change of data, loss of data, an interruption of business etc., caused by using the
product or an unusable product.
5. The manufacturer assumes no responsibility for any damage and loss of profits, caused
by usage except for explained in the user manual.
6. The manufacturer assumes no responsibility for damage caused by wrong transport or
action, due to connecting with other products.