SPS ZOOM 300, User Manual

Page: 9 / 45

ZOOM 300 User manual Revision 03 January 2015

Do not perform disassembly or rebuilding. Fire, electric shock or burn could result.
Only MIDAREX authorized distributors can disassemble or rebuilt.
 Do not collimate the sun directly.
 Do not cover the charger. Fire could be result.
 Do not use defection power cable, socket or plug. Fire, electronic shock could result.
 Do not use wet battery or charger. Fire, electronic shock could result.
 Do not close the instrument to burning gas or liquid, and do not use the instrument in
coal mine. Blast could be result.

Do not put the battery in the fire or high temperature condition. Explosion, damage
could result.
 Do not use the battery which is not specified by MIDAREX. Fire, electric shock or burn
could result.
 Do not use the power cable which is not specified by MIDAREX. Fire could result.
 Do not short circuit of the battery. Fire could result.

When this product encounters disturbance of severe Electrostatic Discharge, perhaps
it will have some degradation of performance like switching on/off automatically and
so on.

Do not touch the instrument with wet hand. Electric shock could result.
 Do not stand or seat on the carrying case, and do not turn over the carrying case
arbitrarily, the instrument could be damaged.
 Be careful of the tripod tiptoe when setup or move it.
 Do not drop the instrument or the carrying case.

Do not touch liquid leaking from the instrument or battery. Harmful chemicals could
cause burn or blisters.

Please assemble the tribrach carefully: if the tribrach is not stable, series damage could
result.
 Do not drop the instrument or tripod. Series damage could result.
Before use it, check the central screw is tight.
 GPS and Smart port connectors on the rear panel of the scanner are up to IP65
standard when the protective caps are well mounted, or used with cables specified by
MIDAREX (GPS, Ethernet and power supply connections).
The USB port is up to IP65 standard also without the rubber cap but it is mandatory to
keep the connector free from dust and water before using it. It is recommended to
keep the rubber cap on during the scan and to use the USB port in safe environment, in
order to avoid harming the device.
！
CAUTION
！
WARNING