99
GS \ nL nH
[Name] Set relative vertical print position in page mode
[Format] ASCII GS \ nL nH
Hex 1D 5C nL nH
Decimal 29 92 nL nH
[Range] 0
nL
255; 0
nH
255
[Description] Sets the relative vertical print starting position
from the current position in page mode.
This command sets the distance from the
current position
to [( nL + nH
256)
vertical or horizontal motion unit]
inches.
[Notes]
This command is ignored unless page mode is selected.
When pitch N is specified to the movement downward: nL
+ nH
256 = N
When pitch N is specified to the movement upward (the
negative direction), use the complement of 65536.
When pitch N is specified to the movement upward: nL + nH
256 = 65536
- N
Any setting that exceeds the specified printing area is
ignored.
This command function as follows, dependin
g on the print
starting position set by
ESC T
:
When the starting position is set to the upper left or lower
①
right of the printing, the vertical motion unit (y) is used.
When the starting position is set to the upper right or lower
②
