95
[Format] ASCII GS P x y
Hex 1D 50 x y
Decimal 29 80 x y
[Range] 0
x
255; 0
y
255
[Description] Sets the horizontal and vertical motion units to
approximately 25.4/ x mm { 1/ x inches} and approximately
25.4/ y mm {1/ y inches}, respectively.
When x and y are set to 0, the default setting of each value is
used.
[Notes]
The horizontal direction is perpendicular to the paper fee
d
direction and the vertical direction is the paper feed direction.
In standard mode, the following commands use x or y,
regardless of character rotation (upside-down or
90
clockwise rotation):
Commands using x:
①
ESC SP
,
ESC $
,
ESC \
,
FS S, GS L
,
GS W
Commands using y:
②
ESC 3
,
ESC J
,
GS V
In page mode, the following command use x or y,
depending on character orientation:
When the print starting position is set to the upper left or
①
lower right of the printing area using
ESC T
(data is buffered
in the direction perpendicular to the paper feed direction):
Commands using x:
ESC SP
,
ESC $
,
ESC W
,
ESC \, FS S
Commands using y:
ESC 3
,
ESC J
,
ESC W
,
GS $
,
GS \
,
GS
V
