76
first data group [xL xH yL yH d1...dk] is NV bit image 01H,
and the last data group [xL xH yL yH d1...dk] is NV bit image
n. The total agrees with the number of NV bit images
specified by command
FS p
.
A definition data of a NV bit image consists of [xL xH yL yH
d1...dk]. Therefore, when only one NV bit image is defined
n=1, the printer processes a data group [xL xH yL yH d1...dk]
once. The printer uses ([data: ( xL
xH
256)
( yL
yH
256)
8]
[header :4]) bytes of NV memory.
The definition area in this printer is a max
imum of 2M bits
(256K bytes). This command can define several NV bit
images, but cannot define a bit image data whose total
capacity [bit image data
header] exceeds 2M bytes (256K
bytes).
The printer is busy immediately before writing into NV
memory, regardless of the setting of DIP switch 2-1.
The printer does not transmit ASB status and perform
status detection during processing of this command even
when ASB is specified.
When this command is received during macro definition,
the printer ends macro definition, and begins performing this
command.
Once a NV bit image is defined, it is not erased by
performing
ESC @
, reset, and power off.
This command performs only definition of a NV bit image
and does not perform printing. Printing of the NV bit image is
