42
as follows:
[Notes]
If the values of m is out of t
he specified range, nL and data
following are processed as normal data.
The nL and nH indicate the number of dots of the bit image
in the horizontal direction. The number of dots is calculated
by nL + nH
256
.
If the bit
-image data input exceeds the number of dots to
be printed on a line, the excess data is ignored.
d indicates the bit
-image data. Set a corresponding bit to 1
to print a dot or to 0 to not print a dot.
If the width of the printing area se
t by
GS L
and
GS W
less
than the width required by the data sent with the
ESC
command, the following will be performed on the line in
question (but the printing cannot exceed the maximum
printable area):
The width of the printing area is extended to the
①
right to
accommodate the amount of data.
If step
does not provide sufficient width for the data, the
②
①
