31
The pulse ON time is [ t
100 ms] and the OFF time is [ t
100ms].
[Notes]
When the printer is in an error status when this command
is processed, this command is ignored.
When the pulse is output to the connector pin s
pecified
while
ESC p
or
DEL DC4
is executed while this command is
processed, this command is ignored.
The printer executes this command upon receiving it.
With a serial interface model, this command is executed
even when the printer is off-line, the receive buffer is full, or
there is an error status.
With a parallel interface model, this command cannot be
executed when the printer is busy. This command is
executed even when the printer is off-line or here is an error
status when DIP switch 2-1 is on.
If print data includes the same character strings as this
command, the printer performs the same operation specified
by this command. The user must consider this.
This command should not be used within the data
sequence of another command that consists of 2 or more
bytes.
