32
CREATE PMS (PREVENTATIVE MAINTENANCE) TAB
This allows for the creation of PMs that will appear on the
“
Scheduler
”
tab after the parameters have been created and
the
“
Update PM
”
button has been pressed. Time frequency of the PM can be set to months or nozzle cycles.
SPARE PARTS AND SPRAY SPECIALIST TABS
A complete list of spare parts for your specific system configuration can be found by selecting the Spare Parts tab. Parts
can be selected from the drop down list and the part description can be viewed or edited.
The contact information for your local Spraying Systems Co.
®
Spray Specialist can be found by selecting the
Spray
Specialist
tab. These editable boxes contain the name, phone number, and email address of your Spray Specialist.
TROUBLESHOOTING
The 1750+ provides troubleshooting tips for some of the most common issues that may occur and steps to resolve any
problems. This feature provides some troubleshooting measures you can take to try and resolve your issue before
contacting your local Spray Specialist for support.
Once the issue is selected, you will see several prompts for each issue. These prompts could suggest an action to
preform to try and resolve the issue, a system component to check, or direct you to the system manual.
Spray Specialist Info
PM creator screen, editing the PM
PM Parts List for a Pump Repair Std
Spare Parts List
