30
SECTION 8
FAULTS AND ALARMS
Active alarms screen
8.1 FAULTS AND ALARMS SETTINGS
When the fault indicator in the left
-
hand icon menu is illuminated yellow/orange, the 1750+ has detected that
there is a fault present.
Some faults are recoverable, but certain faults can result in the 1750+ entering standby mode. When this happens,
triggering signals or events will no longer be accepted until the reason for the fault has been corrected. However, the
spray control panel will still display the fault condition on the alarm history screen. Once the fault has been corrected,
complete a power cycle of the 1750+ to reset and clear the fault.
Pressing the orange reset button in the top right
-
hand corner of the screen will also reset any active alarm that
occurs due to a recoverable fault.
The alarm history screen will show a record of all past faults. It will list the time that each fault occurred, and will also
show the fault description. You can select the time period that you would like to view using the
“
Duration
”
drop down
menu and pressing
“
Refresh
”
to see the updated results.
See the
Faults and Troubleshooting
section to correct the displayed fault.
Active alarm trigger warning icon
Alarm history screen
