10
C. Rear Brake Hose Routing
1.
Begin by installing the rear brake caliper and any applicable adapter if using a rotor larger
than 160mm. Please note the Rollik 150 frame is not compatible with rotors larger than
180mm.
2.
Route the rear brake line starting from the caliper
-
attaching it to the rear triangle using the
supplied zip ties on the cable saddles, and the screw in the p
-
clip.
3.
Leaving a small amount of slack between the p
-
clip and the front triangle, continue to route
the line up the down tube using the supplied zip ties.
D. Rear Derailleur Cable Routing
1.
Begin by feeding the rear derailleur cable housing into the rear port on the top of the drive
side chainstay near the rear axle. It will emerge from the forward port on the chainstay yoke
behind the bottom bracket:
