26
1.
The upper bearings in the link are removed by pressing them inboard, toward the centerline of the
frame. A spacer of some type is required in the center of the link in order to prevent damage. Combine
your 13
-
14mm outer diameter socket with an extension, drift punch, or other implement as shown.
Begin gently tapping with the hammer to push the bearing out of the link:
K. Upper Link Bearing Replacement
2.
The lower bearing in the link is removed in the same manner, but is pressed outward, away from
the centerline of the frame. A PVC tube of 23
-
25mm inner diameter is ideal to support the link and
contain the bearing.
