5
The Rollik 150 frame incorporates a novel system to quickly adjust the geometry between two different
settings or modes. The normal mode is useful as an all
-
around trail setting, providing a useful amount of
pedal clearance for rocky terrain and nimble steering at most climbing and descending speeds. The low
mode sacrifices some pedal clearance for a lower center of gravity and more precise steering at high
speeds. To switch between the two modes, follow these steps:
1.
Unscrew the rear shock mount screw 3 full turns (1080°) using a 10mm box end wrench:
A. Geometry Adjustment
2.
Push downward on the screw to free the oval shaped head of the shock pin from its recess on
the shock yoke:
