2
1
TIC-TAC-TOE PANEL
TIC-TAC-TOE PANEL
TIC-TAC-TOE PANEL
TIC-TAC-TOE PANEL
5
4
3
912-121
912-121
912-121
912-121
The Tic-Tac-Toe Panel attaches below the deck to the
powdercoat.
Hardware: Stainless steel tamper resistant.
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
gaskets between the brackets and posts.
Tic-Tac-Toe Panel Plan:
Tic-Tac-Toe Panel Plan:
Tic-Tac-Toe Panel Plan:
Tic-Tac-Toe Panel Plan:
MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
center of the posts with 4 attachment brackets, with
Event: Tic-Tac-Toe Panel shall be constructed of cylind-
rical blocks with silkscreen letters are held by 1” OD pipe
Event is 40-1/2” wide and attaches with four attachment
brackets.
Paint shall be electrostatically applied oven cured
Touch up any marred paint surfaces.
Periodically check hardware for integrity and tightness.
Install the panel in the center of the posts, if installing
•
under a deck install with the top two brackets touching
the bottom of the deck.
Install with weld nut downward.
•
Install with no more than 3-1/2” between the top of the
•
wall and the bottom of the deck.
It is helpful to install the top two brackets first on the
•
panel. Then screw them into the post to help hold the
wall in position, the gaskets go between the brackets
and the post to prevent moisture from building up.
Then pull the bottom of the panel out and slide the
other two brackets on. Then screw them to the post.
When the unit is installed on bubble, tighten all
•
hardware.
