MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
Drive Panel Plan:
Drive Panel Plan:
Drive Panel Plan:
Drive Panel Plan:
The Drive Panel attaches below or above the deck to the
posts with 4 panel attachment brackets. See the Top Down
View for placement.
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
Touch up any marred paint surfaces.
Periodically check hardware for integrity and tightness.
Attach the panel attachment brackets to either side
•
of the panel. Use the panel brackets as a template
to mark, then drill 2 holes through each side of the
panel.
Using two people, hold the panel up and attach the
•
brackets to the post with gaskets between the post
and brackets, using the self-tapping screws. The
brackets can be installed without the panel attached
if you mark where the brackets should be. This can
make installation a bit easier.
Install with no more
no more
no more
no more than 3-1/2" between the wall
•
and the nearest edge of the deck. This meaurement
is CRITICAL
CRITICAL
CRITICAL
CRITICAL for the safety of the users.
It is helpful to install with a couple of equal size shims
•
to help hold the wall in position.
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
Event: Drive Panel is constructed of 3/4" polyethylene
includes UV protectant to preserve color fastness. Metal
brackets are powdercoated.
Paint shall be electrostatically applied oven cured
powdercoat.
Hardware: Stainless steel tamper resistant.
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
2
1
DRIVE PANEL 3-1/2"
DRIVE PANEL 3-1/2"
DRIVE PANEL 3-1/2"
DRIVE PANEL 3-1/2"
5
4
3
912-221
912-221
912-221
912-221
