1
TRIPLE RAIL SLIDE
TRIPLE RAIL SLIDE
TRIPLE RAIL SLIDE
TRIPLE RAIL SLIDE
5
4
3
2
912-203
912-203
912-203
912-203
912-204
912-204
912-204
912-204
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
Sheet 2 of 2
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
SPECIFICATIONS:
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
INSTRUCTIONS:
MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
MAINTENANCE:
Triple Rail Slide Plan:
Triple Rail Slide Plan:
Triple Rail Slide Plan:
Triple Rail Slide Plan:
Mark (2) grounds holes for the slide legs by placing
•
the slide onto the deck, spray paint the ground to
mark leg positions, and then remove the slide. (the
legs are not attached to the slide yet).
Install the slide leg on the bottom of the slide with (4)
•
3/8" x 3/4" button head bolts.
Install the slide with legs attached into the ground
•
holes first, then to the deck.
Re-bar goes through the holes in the bottom of the
•
legs.
The connector plate attaches to the deck when it
•
is 90 degrees to the deck and any adjustments have
been made to the ground holes.
It may be necessary to field drill the connector plate
•
to the slide.
Connect the addaptor plate with (4) 3/8" x 1-1/4"
•
button head bolts, no washer on top, and 3/8" washer
and lock nut on bottom to the deck, and (2) 3/8" x
3" button head bolts to connect slide to adaptor.
Position the ducking bar so that it is approximately
•
38" off the top of the deck.
Install using the two attachments brackets with
•
gaskets between the post and bracket.
The Triple Rail Slide connects to the deck via a plastisol
coated connector plate. The connector plate attaches to
the top of the deck holes which are 15" apart on center.
The slide legs are attached to the underneath of the exit
end of the slide.
Touch up any marred paint surfaces.
Periodically check harware for integrity and tightness.
Superifcial scarring of the plastic can be 'healed' by
gentle use of a heat gun or torch.
Event: Triple Rail Slide shall be constructed of 3/8" double
wall construction has plastisol coated connector plate to
deck with double slide legs and re-bar to ground. Has 2
slide beds with 4" high sideways. Comes with slide guard
brackets and hardware.
Hardware: Stainless Steel tamper resistant.
