2.
Put the Net (M) on the top of trampoline mat as shown in
figure 13.
3.
Spread the net out at the base, align the eyelets at the net bottom to
V-rings so it resembles the image in Figure 14. Ensure the net is
fully unraveled and not twisted.
4.
It is important to correctly align your net before connecting it
to the jumping mat. At the base of your net is the safety
webbing system, made of the thick dark green material in
diagonal cross pattern. Align the web line meeting points (see
the right hand side figure) to each of the enclosure pole
T-joints. The enclosure pole T-joints look like the below
piece.
The Eyelets for the enclosure net on each side of the web line
meeting point should connect with the spring eyelet hole on
each side of the enclosure pole connection point. See Figure
14a.
5.
Select any single spring on the trampoline and undo with the trampoline spring hook. Place the
closest enclosure net base eyelet over the V-ring, then reattach the
spring as show in Figures 15, 16 & 17.
Working in a clockwise direction, undo the next trampoline spring
and place the next enclosure net base eyelet over the V-ring, and
reattach the spring. Continue this process around the entire base of
the trampoline, working always to the next spring and eyelet.