2.
Divide the Mat (H) into quarters and connect the springs as
shown in Figure 8.
4.
Divide the Mat (H) into eighths and connect the springs as
shown in Figure 9.
5.
Connect the remaining springs to the mat.
6.
When the Springs (H) have been properly connected, the
trampoline should look like Figure 11.
Note: indicative picture only, number of springs will vary
depending on the size of your trampoline.
Net and Pole Assembly
1.
Lay out the Net (M) on a clean and dry surface. Familiarise
yourself with the key parts of the net, namely the “Zipper”
entrance and the “Eyelets” at the bottom of the net. See
Figure 12.
NOTE: To ensure your net is not inside out, check the
zipper entrance is making an “L” shape when looking at
the outside of the net. This net is also designed to be
installed on the inner (mat) side of the enclosure poles.
The net is not designed to be forced over the outer side of
the enclosure poles.