5.
Once completed, the skeleton of the Trampoline should look
like the Figure 5.
Mat Assembly
To facilitate the assembly of the springs to the mat, please use the
Spring Hook provided to pull the springs during assembly.
Please Note
: The hooks at each end of the spring
are
different in the opening. One is wider, and the
other is narrower. See the spring as this:
Put the end with narrower opening to the V-ring, and the end with wider opening to the holes on the
top rail. Please see below illustrations:
1.
Spread out the Mat (H) and have both the Springs (J) and
Spring Hook ready for assembly.
2.
Divide the Mat into halves and then connect the first set of
Springs (J) as shown in Figure 7.