11
12. SILENT ENTRY MODE
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the safe is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
13. KEEPING YOUR SAFE DRY
We recommend placing a moisture/protective barrier between your safe and
concrete floor to prevent any moisture, mildew and rust damage the safe. Installing
your safe in a place with climate control (heat in the winter and cooling in the summer)
is highly recommended. In areas of high humidity or frequent temperature fluctuations
(garages) it is recommend to take appropriate precautions to ward against moisture
damage. We strongly encourage the use of an internal dehumidifier and/or desiccants
to protect your contents from rust or mildew. Internal dehumidifiers should not be
in direct contact with the side or back walls.
11. CLEARING ALL RECORDED FINGERPRINTS
NOTE:
If 100 max fingerprints have already been programmed
indicator ring will flash 5
times and beep 5 times. We recommend clearing all programmed fingerprints and starting
the programming process over.
Hold Reset button. Initially,
the indicator ring and LED
light will flash green and
beep once. Continue
holding reset button for 5
seconds, the LED light will
flash green 10 times and
beep 10 times.
Hold Down
Reset Button
AA
AA
AA
AA
