background image

DISCLAIMER - READ BEFORE SAFE SETUP

WEAPON  STORAGE

SAFETY

Thank you for choosing a Sports Afield Safe to protect your valuables. We are 

committed to securing, organizing and protecting your most important documents, 

valuables and keepsakes.
 Your safe is built to last a lifetime. However, please understand that the locking 

mechanism has precision parts. If you experience ANY difficulty opening or closing 

your safe. DO NOT FORCE THE SAFE OPEN. Doing so may jam the components in 

the lock, which will require a safe technician to unlock your safe. This causes an 

inconvenience to you and may lead to a claim denial.
If you experience problems or challenges with your safe, please contact us. 

Many issues can be quickly resolved without the product being returned.

Safe bodies and doors are extremely heavy thus SA Consumer Products requires a 

minimum of two people to insure stability of the safe during installation. Always ensure 

proper installation, as laid out in this manual, and do not open the door with the safe 

on an uneven or unstable floor. Ignoring this could result in serious injury or death. 

If you choose to utilize this safe to store a weapon always follow proper weapon 

and local laws. 
SA Consumer Products strongly recommends that you do not store firearms. 
Always follow the firearm safety rules set out by the firearm’s manufacturer. 
A Sports Afield Safe or any other firearm storage device cannot take the place 

of other safety procedures including advising children of the dangers of firearms. 
SA Consumer Products and its distributors of the Sports Afield Safes do not 

recommend, suggest, advise, promote, or otherwise condone the ownership 

or use of firearms.  We believe the decision to own or use a firearm is a serious 

decision that should only be made by an adult who has carefully considered 

the risks and benefits of such a decision.   

PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR 

SPORTS AFIELD SAFE.
DO NOT LOCK THIS MANUAL OR THE BACKUP KEYS IN YOUR SAFE.

Contact Customer Service at [email protected] or (888) 792-4264

Summary of Contents for SA5520INS-BIO



















Reviews: