background image

2. UNDERSTANDING YOUR SAFE

4

4. INSPECTION

 

 

3. UNBOXING

Make sure to inspect your safe for shipping damage before accepting delivery.

If you find any damage, please contact the delivery company (or carrier) immediately.

 

Any damage not noted upon delivery must be reported within fifteen (15) days 

or there will be no recourse. Any noted damage at the time of delivery must be 

resolved with the delivery company and/or retailer. Shipping damage is not 

warrantable by SA Consumer Products.

WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN GROUND.

PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED 

SAFES. WHILE UNBOXING BE SURE TO HAVE A SECOND PERSON HOLD AND 

STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING INJURY, AND/OR 

DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.  

Remove the packaging. If your safe is still on shipping feet you can simply lift 

the box up and off the safe once the strapping has been removed. If your safe 

does not have shipping feet you will need to carefully remove the box, ensuring 

not to damage the safe and/or injure yourself. You will want to have someone 

stabilize the safe when removing the cardboard and other packing material 

from underneath the safe.

External

 Hinges

Adjustable 

Shelf Rails

Active

Locking

 Bolts

Fully 

Wrapped 

Adjustable 

Shelf

Gun

Rack

Bolt Down

 Holes

Carpeted Door 

Panel

Reset 

Button

Fire 

Seal

Biometric

Scanner

AA Battery 

Compartment

Backup 

Key Entry
Magnetic

Key Cover

Summary of Contents for SA5520INS-BIO



















Reviews: